Electricity/Electronics

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
per page
  1. Connecting leads, 32 A

    For use in low-voltage circuits, flexible PVC strand, plug with full insulated axial socket, strain-relieved.

    • Plug and socket: 4 mm dia. (nickel-plated)
    • Conductor cross section: 2.5 mm2
    • Continuous current: 32 A max.
    • Contact resistance: 1.8 mΩ
    Kat.-Nr.LengthColour
    501 20   8 25 cmRed
    501 21   8 25 cmBlue
    501 23   8 25 cmBlack
    501 4025 cmYellow/Green
    501 25   8 50 cmRed
    501 26   8 50 cmBlue
    501 28   8 50 cmBlack
    501 4150 cmYellow/Green
    501 30   8 100 cmRed
    501 31   8 100 cmBlue
    501 33   8 100 cmBlack
    501 42100 cmYellow/Green
    501 35   8 200 cmRed
    501 36   8 200 cmBlue
    501 38   8 200 cmBlack
    501 43   8 200 cmYellow/Green
  2. 54010

    LD Field electrometer

    Field electrometer

    Details
  3. 54011

    LD Electrostatics set 1

    Electrostatics set 1

    Details
  4. 54012

    LD Electrostatics set 2

    Electrostatics set 2

    Details
  5. 540131

    LD LIT: Field electrometer, German

    LIT: Field electrometer, German

    Details
  6. 540132

    LD LIT: Field electrometer

    LIT: Field electrometer

    Details
  7. 540133

    LD LIT: Field electrometer, French

    LIT: Field electrometer, French

    Details
  8. 587251

    LD Rochelle salt crystal (piezo-electric element)

    Rochelle salt crystal (piezo-electric element)

    Details
  9. Plug-in boards, STE

    The basics of experiment setups in the plug-in system include plug-in boards. These hold electric and electronic circuits in student, practical and demonstration experiments.

    4 mm sockets are electrically connected to jack panels in the plates. These jack panels are available as wire crossings with 5 sockets each and also as wire quadrats with 9 sockets each on the experiment surfaces. The grid spacing measure 19 mm between the outside sockets of neighboring jack panels and 50 mm between the middle sockets.

    Several plug-in boards can be joined together to form experiment surfaces of any size. The grid spacing of 19 mm and 50 mm is also available in the transition from one plate to another.

    Kat.-Nr.DimensionsConnector gridsLine inter­sectionsComment
    576 74   8 DIN A42424
    576 75   8 DIN A34848
    580 10   8 DIN A296
    726 50   8 297 mm x 300 mm24with additional fields to hook onto the frame
    726 54   8 634 mm x 400 mm96to hook onto the frame
    576 71   8 100 mm x 50 mm2
  10. 57677

    LD Board holders, STE, pair

    Board holders, STE, pair

    Details
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
per page
Print page

Contact Us

Customer Centre:
Technical Service-Hotline:
Click here for our Contact Form or Postal address.

Contact Us